服务热线
15920845984
Table 1 summarizes the types of SAS drives that are supported by the 2076-92F expansion enclosure. The 2076-92F expansion enclosure is supported on Storwize® V7000 Gen2 and Storwize V7000 Gen2+ systems.
| Description | FRU part number |
|---|---|
| 600 GB 15 K disk drive | 01LJ061 |
| 1.2 TB 10 K disk drive | 01LJ062 |
| 1.8 TB 10 K disk drive | 01LJ063 |
| 6 TB 7.2 K Near-Line SAS disk drive | 01LJ064 |
| 8 TB 7.2 K Near-Line SAS disk drive | 01LJ065 |
| 10 TB 7.2 K Near-Line SAS disk drive | 01LJ066 |
| 12 TB 7.2 K Near-Line SAS disk drive | 01LJ179 |
| 1.6 TB 2.5-inch flash drive | 01LJ067 |
| 3.2 TB 2.5-inch flash drive | 01LJ068 |
| 1.92 TB tier 1 flash drive | 01LJ069 |
| 3.84 TB tier 1 flash drive | 01LJ070 |
| 7.68 TB tier 1 flash drive | 01LJ071 |
| 15.36 TB tier 1 flash drive | 01LJ072 |
Table 2 summarizes the part numbers for other parts. The values are the same for all Storwize V7000 systems that support the2076-92F expansion enclosure.
| Description | FRU part number | Comments |
|---|---|---|
| 3 m 12 Gb SAS Cable (mSAS HD) | 00AR317 | |
| 6 m 12 Gb SAS Cable (mSAS HD) | 01EJ190 | |
| 16A power cord C19/C20 2 m | 39M5388 | |
|
Enclosure
NoteReplaces enclosure FRU P/N 01LJ112.
|
01LJ607 | Includes the drive board, signal interconnect board, and internal power cables, in an otherwise empty enclosure. |
| Rail kit | 01LJ114 | |
| Front fascia (4U front cover) | 01LJ116 | |
| Display panel assembly | 01LJ118 | |
| PSU fascia (1U cover) | 01LJ120 | The fascia must be removed to access the power supply units. |
| Power supply unit (PSU) | 01LJ122 | The expansion enclosure contains 2 PSUs. Each PSU requires a C19/C20 power cord. |
| Secondary expansion module |
01LJ124 (use with enclosure FRU P/N 01LJ112)
01LJ860 (use with enclosure FRU P/N 01LJ607 |
The expansion enclosure supports two-secondary expansion modules.
NoteThe secondary expansion modules are Tier 2 CRUs. You can replace them or request that they be replaced by IBM® Service. For example, if the enclosure is FRU P/N 01LJ112 and it is powered on, you can contact your service representative to replace the secondary expansion module.
CAUTION:
Use caution when you are removing or replacing a secondary expansion module from an enclosure with FRU part number 01LJ112. Avoid contact with the connectors on the main board.
|
| Fan module | 01LJ126 | The expansion enclosure contains four fan modules. |
| Expansion canister | 01LJ128 | |
| Cable management arms (CMA) | 01LJ130 | The part contains the upper and lower CMA. |
| Top cover | 01LJ132 | |
| Fan interface board | 01LJ134 |
