广州盈融信息科技有限公司，IT运维服务商，维保项目专业后备支持。IDC机房、小型机、存储、服务器、网络设备、数据库维保|运维|维护|维修。

Front view

Notes:

This parts listing supports the IBM BladeCenter H.
If your specific model is not listed, please use the Quick path feature on the right-nav, and refer to the product description. Look for the "Based on" model.

Item	Description	Replacement part number	CRU
1	Chassis shell (without shuttle)
1	(all models)	31R3308	N
2	Top and bottom bezels
2	(all models)	31R3300	1
3	Power Module (without fan pack)
3	2900 W (all models)	39Y7364	2
4	Power Module (with fan pack)
4	2980 W High Efficiency (model 4Tx)	39Y7415	2
5	Power Module filler
5	(all models)	31R3304	1
6	Fan pack
6	(models equipped with 2900 W power module only)) (model 5Tx)	43V7099	1
7	CD/DVD drive
	CD-RW drive, primary (model 4Xx)	39M3545	1
	CD-RW drive, alternate (model 4Xx)	39M3501	1
	DVD-ROM drive (model 5Tx)	43W4619	1
	DVD drive, multi-burner, primary (model 4Yx)	43W4607	1
	DVD drive, multi-burner, alternate (model 4Yx)	43W4609	1
	Ultrabay Slim CD-RW/DVD-ROM combo drive	42C0967	1
	Ultrabay Slim CD-RW/DVD-ROM combo drive (model 5Tx)	42C0969	1
	DVD drive, SATA, multi-burner (model 4Sx) (option)	44W3254	1
	UltraSlim enhanced SATA multi-burner (model 5Tx)	44W3256	1
8	Media tray
	without optical drive filler (use with midplane: 25R5780) (models 4Sx, 4Tx)	44X2268	1
	without optical drive (use with midplane: 25R5780) (model 4Xx)	31R3305	1
	without optical drive (use with midplane: 25R5780) (model 4Yx)	43X0299	1
	without optical drive (use with midplane: 44X2302) (models 4Sx, 4Tx)	44X2290	1
9	System service cards
	(models 4Sx, 4Tx)	44X2267	1
	(model 4Yx)	43X0457	1
	(model 4Xx)	25R5676	1
10	Filler
	Blade server (all models except 4Sx)	39M3317	1
	optical drive	49Y4868	1
	optical drive (model 4Sx)	46C5496	1

Note: Your BladeCenter is equipped with one of two different midplane FRUs, depending on the media tray connector design. The media tray you install must match the connector on the midplane. Before you replace a media tray, identify the part number of the midplane FRU either by reading the FRU label on the midplane or by logging on to the Advanced Management Module and checking the chassis hardware data. See the Advanced Management Module User’s Guide or the Advanced Management Module Command-Line Interface Reference Guide for more information about viewing BladeCenter hardware data.

Rear view

rear view

Item	Description	Replacement part number	CRU
1	Chassis shell (without shuttle)
1	(all models)	31R3308	N
2	Midplane
	(older models, chassis hardware version v6 or earlier)	25R5780	N
	(newer models, chassis hardware version v8 or later)	44X2302	N
3	Shuttle (with card and cable)
3	(all models)	31R3331	N
4	Management Module
4	(all models)	60Y0621	1
5	I/O Module bays 1-6 and Management Module filler
5	(all models)	25R9934	1
6	Blower Module
	(older models, chassis hardware version v6 or earlier)	44E5083	1
	Enhanced Blower Module
	(newer models, chassis hardware version v8 or later)	68Y8205	1
7	Card and cable (rear LED/serial connector)
7	(all models)	31R3307	N
8	Filler
	I/O Module bays 7-10, double high filler (all models)	31R3311	1
	I/O Module bays 7-10, single high filler (all models)	31R3303	1
	Cables
	serial port breakout (all models)	40K9608	1
	serial USB (option) (model 5Tx)	43X0510	2
	1 meter Switch stack (option) 44R8302 (model 5Tx)	44R8302	2
	Card
	4x Expansion (model 5Tx)	49Y9976	2
	Miscellaneous kit
	(all models)	31R3306	1
	Rack kit
	(all models)	39M3256	1
	System service label
	(all models)	44X2289	1
	Switch and Bridge Modules
	Cisco Nexus 4001I Switch Module (option) (MPN: 46C9270, Old MPN: 46M6071) (model 5Tx)	46C9237	1
	InfiniBand Pass-thru (option) (model 5Tx)	43W4424	2
	10 Gigabit High-Speed Switch (option) (model 5Tx)	39Y9265	2
	Multi-Switch Interconnect Module(option)	39Y9312	2
	Cisco Catalyst Switch Module 3110X (option) (MPN: 00Y3250, Old MPN: 41Y8522) (model 5Tx)	00Y3253	1
	Cisco Catalyst Switch Module 3110G (option) (MPN: 00Y3254, Old MPN: 41Y8523) (model 5Tx)	00Y3257	1
	Cisco Catalyst Switch Module 3012 (option) (MPN: 46C9272, Old MPN: 43W4395) (model 5Tx)	46C9276	1
	Cisco Systems ® 4 Gigabit 10-Port Fibre Channel Switch Module (option) (MPN: 44E5692, Old MPN: 39Y9284) (model 5Tx)	44E5676	1
	Cisco Systems ® 4 Gigabit 20-Port Fibre Channel Switch Module (option) (MPN: 44E5696, Old MPN: 39Y9280)(model 5Tx)	44E5677	1
	Inferion Gigabit with out stacking (option)	43W4404	2
	Intelligent Copper Pass-thru (option)	44W4486	2
	BNC 1/10 Gigabit Uplink Ethernet Switch (option)	44W4407	2
	BNC 1/10 Gigabit Uplink Ethernet Switch (option)	44W4411	2
	QLogic 4 Gigabit Fibre Channel 10-Port full fabric Switch(option) (model 5Tx)	46C7009	2
	QLogic 4 Gigabit Fibre Channel 20-Port full fabric Switch (option) (model 5Tx)	46C7010	2
	QLogic 4 Gigabit 850 nm Fibre Channel 20-Port Pass-thru Switch (option) (model 5Tx)	46C7011	2
	Voltaire 40 Gigabit InfiniBand Switch Module (option) (model 5Tx)	46M6006	2

Note: Before you replace a midplane FRU, identify the part number of the midplane you are replacing either by reading the FRU label on the midplane or by logging on to the Advanced Management Module and checking the chassis hardware data. See the Advanced Management Module User’s Guide or the Advanced Management Module Command-Line Interface Reference Guide for more information about viewing BladeCenter hardware data.

Power cords

Description	Used in these countries	Replacement part number
IEC 320 C20	Worldwide	26R0001
NEMA L6-30P	Canada, Japan, Mexico, United States of America	26R0003
30A 1-phase	Korea	26R0009
IEC 309 32 A/IEC 320 C20	Worldwide except: Australia, Canada, Japan, Korea, Mexico, New Zealand, United States of America	39M5436
32 A/IEC 320 C20	Australia, New Zealand	39M5438

上一篇：IBM BladeCenter E (8677, 1881) 刀箱配件
下一篇：IBM DCS3700 介绍

运维服务商、系统集成商

Front view

Rear view

Power cords

在线咨询